IBM OS/2 CHKDSK

마루 0 8,227 2021.09.03 22:29

IBM OS/2 CHKDSK README

GAMMA Version 1 (March 31, 1997)


THIS PROGRAM IS FOR IBM INTERNAL USE ONLY!


Thank you for your interest in this Beta program.  Please read these

notes before installing and using the Beta version of CHKDSK.



CONTENTS

________


This file contains the following information:


1.0 HIGHLIGHTS OF THIS VERSION OF CHKDSK

2.0 INSTALLING THE CHKDSK BETA

3.0 REMOVING THE CHKDSK BETA

4.0 USING THIS VERSION OF CHKDSK

5.0 TRADEMARKS




1.0 HIGHLIGHTS OF THIS VERSION OF CHKDSK

___________________________________


This version of CHKDSK offers significant improvements for use

with High Performance File System (HPFS) drives:


1.  Single pass correction of errors.

    You can run CHKDSK once to fix all errors on an HPFS drive.


2.  Performance improvements.

    CHKDSK execution is now up to two times faster on non-RAID

    drives, and up to 11 times faster on large RAID drives.


3.  Reduced memory requirement.

    CHKDSK now uses less memory to check large drives (> 4GB).


4.  Improved FOUND directory format.

    Files and directories recovered by CHKDSK and placed in the

    FOUND directory now have their original names (as much as can

    be recovered) appended to the names assigned by CHKDSK.


5.  More sophisticated error detection.

    This version of CHKDSK recognizes errors that previous versions

    did not.


6.  More sophisticated error correction.

    This version of CHKDSK will recover files and directories in cases

    where previous versions would have deleted them.


7.  Binary log file created in the root directory for use by Service.

    File name is chkdsk.log and a backup is kept in chkdsk.old.

    Service has a tool (PMCHKLOG) to format the logfile.


Improvements in this version of CHKDSK are for HPFS drives only.

CHKDSK operation for File Allocation Table (FAT) drives has not

changed from prior versions.


This enhanced CHKDSK operates on IBM OS/2 Warp 3.0 and higher,

including IBM Warp Server 4 and IBM Warp Server 4 SMP.  IBM OS/2 2.1

and IBM OS/2 2.1 SMP are NOT supported.




2.0 INSTALLING THE CHKDSK BETA

__________________________


To install this version of CHKDSK:

        1) Backup your system.

        2) At an OS/2 prompt, type INSTALL and press enter.

        3) Follow the prompts to install CHKDSK on your boot drive.


Installing this version of CHKDSK results in the following changes:

        a) Two files are added to the drive being checked:

                   chkdsk32.exe

                   chkdsk32.dll

        b) The existing uhpfs.dll file is replaced

        c) The original uhpfs.dll is renamed uhpfs.sav

These changes cause the Beta version to run instead of the previously

installed version of CHKDSK (including AUTOCHECK operation).


If you want to be able to choose between the Beta and the previous

CHKDSK version, take the following actions:

        1) Make sure there is a .; entry in your LIBPATH statement in

            config.sys ahead of \os2\dll; .

        2) Copy the beta uhpfs.dll to a new subdirectory of your choice;

            the new subdirectory cannot be in your LIBPATH statement.

        3) Restore the original uhpfs.dll from uhpfs.sav .

With these changes, the Beta version of CHKDSK operates when initiated

from the new subdirectory; otherwise, the previously  installed version of

CHKDSK operates.




3.0 REMOVING THE CHKDSK BETA

____________________________


The following actions will remove the CHKDSK Beta:

        1) On the drive on which you installed the Beta version, go to

            the \os2 subdirectory.

        2) Erase the following file:  chkdsk32.exe

        3) Go to the \os2\dll subdirectory on the same drive.

        4) Erase the following file:  chkdsk32.dll

        5) Verify uhpfs.sav is in this subdirectory.

        6)  Erase the following file:  uhpfs.dll

        7) Copy uhpfs.sav to uhpfs.dll


The CHKDSK Beta is no longer installed.  The previously installed version

of CHKDSK is again your current version.




4.0 USING THIS VERSION OF CHKDSK

____________________________


The interface to CHKDSK remains CHKDSK.COM and PMCHKDSK.  The

command line parameters and messages from CHKDSK are unchanged.


CHKDSK creates a binary log (chkdsk.log) on the root of the drive

being checked.  The previous log file is saved as chkdsk.old .


As with prior versions of CHKDSK, AUTOCHECK of drives over 8GB in

size is not supported.  Drives over 8GB in size should be checked using

the /C option of CHKDSK as follows:

        1) Place a call to CHKDSK in your STARTUP.CMD file and specify

           the drive to check, along with the /C.

        2) CHKDSK then examines the drive and checks the drive if

            needed.


The first time this Beta version of CHKDSK runs on a drive, it

will report errors if the drive was fast formatted.  These errors are

harmless and go away if CHKDSK is run with the /F option.




5.0 TRADEMARKS

_____________


The following terms are trademarks of the IBM Corporation in the

United States or other countries or both:


        IBM

        OS/2


THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.

IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS

FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO

THE INFORMATION IN THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT,

IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.


(C) Copyright IBM Corporation 1997.  All rights reserved.


Comments

Category
State
  • 현재 접속자 124 명
  • 오늘 방문자 1,348 명
  • 어제 방문자 1,197 명
  • 최대 방문자 11,402 명
  • 전체 방문자 2,435,246 명
  • 전체 게시물 3,041 개
  • 전체 댓글수 4,592 개
  • 전체 회원수 104 명

- 쇼핑몰 : Softbox
- 예전 문서 / Old docs
- FTP Server: http://ftp.hanmesoft.com
Facebook Twitter GooglePlus KakaoStory NaverBand